Removal | All Kinds of Automotive Tools

Rubbing Compound

July 1st, 2010 admin No comments

Rubbing Compound

Elimination of contamination of a car paint clay bar

The causes of contamination of the paint

Train Dust: dust track is produced by the friction of train wheels on the tracks. Most new cars are delivered to dealers in train by Therefore, the arrival of a new car can be contaminated before it reaches the dealer. If you live near a rail or in their daily route to work takes him how your vehicle is subject to rail dust.

brake dust: dust the brake particles produced by the friction of the brake pads rub against the rotor and distributed in the air on the road, where contact with other cars.

Industrial Fallout is another type of pollution, but it is a by-product of our modern industrial age.

Paint fight against pollution

One way to check if the contamination is painting, putting his hand in a plastic bag and lightly run over the surface of the painting after washing and drying your vehicle. If the surface is rough and hard of pollution is present and must be removed with a clay bar before applying wax.

eliminate pollution painting

There is no way to avoid contamination of the paint. dough polishing to remove the contamination can be abrasive and eventually remove the finish on the top, a transparent layer of Your Car.

Best how to safely remove paint contamination is a clay bar because it is not cut or use as an abrasive action of polishes. Poli clay bars are the best product to use because it does not dry out with age or decompose with repeated applications. They are abrasive and clear coat safe. Poli clay bar leaves little waste for easy cleaning.

Wash and dry the car before using a bar of clay dirt on the surface causing scratches. Follow the instructions and the use of a clay lubricant to reduce friction bar between the surface of the clay paint.

Work in sections, applying a light mist of lubricant. Drag Gently bar of clay in the area until the finish is smooth and the pollutants removed. Wipe with a clean cloth and microfiber continue to work in sections until the entire vehicle has been processed.

The clay bar is dirty, pull, stretch and bend to expose a new area. When fully throw dirty. 2 oz clay bar should last up to 5-7 treatments. Be careful not to drop the clay bar field.

Clay bars simply to eliminate pollution, not remove scratches or restore the luster. Varnish or wax the car after eliminate pollution of paint to restore shine and protect the paint.

Jack Barker Collision at home, a mobile auto body shop that comes to home or work for repair minor collision, the repair of dents, scratches and repair repair painting. Repairs usually done within a day or less and the cost is usually less than the deductible of your insurance policy. Visit target = "_blank> http://www.collisiononwheels.com" for more information.

About the Author

Collision on Wheels will bring a fully equipped van & trained collision repair technician right to the home or workplace where the work is done on-site to their satisfaction. We service a growing market of consumers who don’t have time to take their car to a body shop for small collision repairs or may be reluctant to make an insurance claim.